Motors/Servos

Configurable Length 5204 Series Yellow Jacket Motors

Have you ever needed a goBILDA 8REX motor with a custom length shaft? Before this doc, you would have had to derive the shaft component into a part studio and cut it to length, then import it into you final doc. This eliminates that tedious and messy process. The length is configurable from the full length (79.5mm) all the way down to 0mm (very useful). There is also a configuration option for the type of cut: raw or retapped. If you have a lathe, retapping the end of the shaft is quite easy. Otherwise, just leave it raw!

Link: cad.onshape.com/documents/875041a04c5ea69f6d9123d1/w/7d7c27615454818ba621c80b/e/c617dfbba6b66ad5c9a38f5a

SB2264MG

A powerful, all-metal low profile servo from ServoCity. The Axon Mini is far superior, especially for the price, but this is here because it's been used in Loony designs in the past.

Link: cad.onshape.com/documents/431290ad9a314c09ad0dc26f/w/4d51e5d4a1d22380cb5aec01/e/408723f4154cfab65dd6fe9b

ReadyToSky 12kg Servo

Same story as the SB2264MG: the Axon Mini is a far superior low profile servo, but this is here for legacy purposes. It can be found on Amazon.

Link: cad.onshape.com/documents/9dfa4fb7c408775840fdc28b/w/fe755ce86fece9011b018b2b/e/229760217bee476ad5fb55c8

Servos (configurable)

This document is similar to the Gecko Wheels (configurable) document in that it is a collection of parts made to make swapping designs easy. It includes three common FTC servos, plus one very large 8 turn servo. The servos included are:

The configuration of this document can be changed between these servos, making it easy to change the type of servo in your robot without having to import a new design.

Link: cad.onshape.com/documents/1152b8ab038ad5d30c48774d/w/6a5cb3f36b26e64df374b968/e/355a40f9f9f26b1b55f87849