Configurable Frames, Beams, and Profiles

Configurable Frames, Beams, and Profiles

REV 15mm Extrusion (configurable)

This doc allows you to import REV 15mm extrusion of any length up to the maximum sold by REV. It also has a configurable appearance for both raw aluminum and black anodized. The material is set to 6061 Aluminum.

Link: cad.onshape.com/documents/d057585cb642ade4268266c3/w/8b51bb9caf23a6c5bae5baf0/e/3bddee52e3d2ad5454f59469 

goRAIL (configurable)

This doc allows you to import goBILDA goRAIL of any length up to the maximum sold by goBILDA. It can be configured to be either normal goRAIL or Open goRAIL depending on your needs. The material is set to 6061 Aluminum.

Link: cad.onshape.com/documents/febacebb4b6f71c94fd85af8/w/2d32c61f3df0388fefa7968f/e/0c44f1a66cc51b7bbbecc8f9 

X Rail (configurable)

This doc allows you to import Actobotics X-Rail of any length up to the maximum sold by ServoCity. It can be configured to be either normal X-Rail or Open X-Rail depending on your needs. The material is set to 6061 Aluminum.

Link: cad.onshape.com/documents/da24694cef6f1f7865fa8953/w/7130ed60f32364996a4d9faa/e/1bb3bd1c596bb712dd06b65e 

goTUBE (configurable)

This doc allows you to import goBILDA goTUBE of any length up to the maximum sold by goBILDA. The material is set to 6061 Aluminum.

Link: cad.onshape.com/documents/204d5f7abd93d19f4cf841bf/w/bc9eca5ba93cbc07d8c23459/e/f69aeac02f42ca90c40117a4 

V-Guide Rail (configurable)

This doc allows you to import goBILDA V-Guides of any length up to the maximum sold by goBILDA. It has pre-applied mate connectors to make attaching it to your assemblies easy. The two mate connectors on the back side are configurable, allowing you to change their inset from the edge of the guide. This is useful for aligning the guide to mounting holes. The third mate connector is automatically placed on the middle of the top side of the guide. It is useful for adding a planar mate between the rail and whatever rides on it, creating a moveable slider joint. The material for the V-Guide rail is 6061 Aluminum.

Link: cad.onshape.com/documents/9eed9f2681afe2b87db511e2/w/6203166abeb7c8e9ca480572/e/ed3fe6a9374c6e1ba2c085b9 

Grid Plate (configurable)

This doc is for creating custom grid plates of any size. The hole diameter and spacing are configurable, as is the thickness. The default is 4mm holes, 8mm spacing, and 2.5mm thickness. These dimensions match all goBILDA grid plates. The material is 6061 Aluminum.

Link: cad.onshape.com/documents/9baac318516b0cca39d20f09/w/9a4d709b32d6b2ef09a96ae2/e/fd25f74f81ff6893300e8a56 

FTC Frame Profiles

This doc is designed to allow you to derive profiles from it. Each part studio has a sketch of a common FTC frame profile, which can be linked to other docs for creating custom parts. The frame profiles in it are:

Link: cad.onshape.com/documents/6dfc86cb42ad4a991e5e2bcf/w/b06b1d8eadad32694fd26f88/e/e6d6990412852925b4b2c1fd